Eneo PXC-2080Z03 Installation And Operation Manual page 82

Web Admin User Manual
5.1.2. Serial Output Mode
Using Serial Output Mode, you can send UART device commands to Server in order to control
PTZ devices, Multiplexer, Access control box, X10 Protocol, z256 protocol by RS-232 or RS-
485/422 communication. In the picture below, serial output mode can be selected among By-
Pass, X10, or Z256.
5.1.3. Transparent Mode
When there are two Server s present on the network, they can act like a transparent interface
between two different UART devices so that the communication between the UART devices can
be made transparently without a flaw.
• Line Mode: The type of communication protocol
- 32 -