Table of Contents
Advertisement
Web Admin User Manual
4.2.
Network Ports
In this configuration, you set up the HTTP port for Server to communicate with the Client PC.
HTTP Port is the network port that is used when a Client PC connects to the Server 's Web
page. It can be
assigned between 80 and 65535 and the default value is 80.
Note: If the HTTP port number is changed to other value than default (80), make sure
the new HTTP port number goes together with the Server 's Internet address.
For example, when IP address is 192.168.1.10 and set the HTTP port to 8080,
you will have to enter http://192.168.1.110:8080 to connect to the server.
4.3.
Bandwidth Control Configuration
Bandwidth control is for limiting maximum network traffic. If it is enabled with certain limit,
maximum data size transferred from Network Cameras won't exceed bandwidth limit set by
users. If transferred data is exceeded, part of data will be randomly lost
- 20 -
Advertisement
Table of Contents
