Eneo PXC-2080Z03 Installation And Operation Manual page 80

Web Admin User Manual
After rebooting, open the Serial Ports window in Device Configuration menu again. Select the
Serial Input Mode, then the Serial Input Mode Configuration windows will be displayed as
shown below.
• Current Port: This shows the name of the port currently configured.
• Current Protocol: This shows the protocol being used. (only RS-232 can be displayed)
Note: If additional sensors need to be added, it will require installation of the
device drivers.
• Serial Input Model: You can select the sensor's model number to use for Serial Input.
The following example is when a speed sensor is selected.
- 30 -