Table of Contents
Advertisement
If the Information message doesn't come out due to the problems like network
failure, you can start the manual installation.
Click the Install ActiveX Control, and the pop-up window will be displayed.
After the installation is successfully completed, Smart Viewer window will be displayed.
- Assigning an IP address
To assign an IP address to the camera proceed as follows:
Click Network Confi guration on the Network Confi guration menu.
Depending on the service type, the network confi guration can be in any of
Static IP, DHCP Client, or PPPoE. You need to set up the network camera
8
Advertisement
Table of Contents
