Table of Contents
Advertisement
Notes on Creating Virtual Drive
The HDDs configuring the disk group should have the same capacity and rotation speed.
Be sure to execute Consistency Check after creating VD.
When installing an OS in VD under the Onboard RAID Controller (MegaRAID ROMB),
create a VD dedicated to OS installation.
WebBIOS cannot be handled via remote console functions of NEC DianaScope.
The physical drive numbers shown in WebBIOS and those shown in Universal RAID
Utility are identified as follows.
– WebBIOS
Enclosure number and Slot number shown in Physical Drives box*
* "X:X:X" shown in Physical Drives box represents Connector number:Enclosure
number:Slot number. With this server, the Connector number is not supported, thus,
it is always indicated as "()". The Enclosure Number is always "1". The Slot number
(0 to 7) represents a slot number of 2.5-inch hard disk drive bay.
– Universal RAID Utility
Enclosure number and Slot number shown in Physical Device Properties
Note that the slot numbers shown in Physical Drives box of WebBIOS are represented by
0-origin numbers, but those in Universal RAID Utility are 1-origin numbers.
Property of Physical Device in Universal RAID Utility
Physical Drives View of WebBIOS
Configuring Your Server 4-49
Advertisement
Table of Contents
