Table of Contents
Advertisement
9-48 Upgrading Your Server
Removal
Remove the memory board in the following procedure.
IMPORTANT:
The memory board is extremely sensitive to static electricity. Make
sure to touch the metal frame of the server to discharge static
electricity from your body before handling the memory board. Do
not touch the memory board terminals or on-board parts by a bare
hand or place the memory board directly on the desk. For static
notes, see the section "Anti-static Measures" described earlier.
The memory board becomes very hot while being powered. When
removing the board, turn off the power and wait for several minutes
before pulling it out.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Unlock the front bezel with the security key, and remove the front bezel.
3.
Remove the two screws, and remove the top cover of the server.
Screws
Advertisement
Table of Contents
