Table of Contents
Advertisement
9-14 Upgrading Your Server
3.
Loosen the two thumb nuts from the front of the server.
4.
Slowly pull out the server from the rack.
The server is latched when a "click" is heard.
When inserting the server back into the rack, lift the green release levers on the sides of the sides of
the server to unlatch the server. Be very careful not to get your finger caught in doing so.
IMPORTANT:
Lift the release lever using a screwdriver or the like. Pushing the
lever with your finger may hurt your finger.
Two release levers are located at a single side of the server. Be sure
to lift the green lever only.
Thumb nuts
Release lever
Advertisement
Table of Contents
