Table of Contents
Advertisement
4-34 Configuring Your Server
Exit
Positioning the cursor to "Exit" shows the Exit menu.
The options on the menu are described below.
Exit Saving Changes
Select this item to terminate SETUP after saving the newly selected information in CMOS
(non-volatile memory). The selection of "Exit Saving Changes" causes the confirmation screen to
appear.
If you select "Yes," SETUP is terminated with the newly selected information saved in CMOS
(non-volatile memory). Then the server automatically reboots the system.
Exit Discarding Changes
Select this item to terminate SETUP without saving the newly selected information in CMOS
(non-volatile memory).
Selecting "Yes" allows SETUP to be terminated without storage of the modified information. If the
setting value is modified, the confirmation screen will appear.
Selecting "No" allows SETUP to be terminated without storage of the modified information. If you
select "Yes" in the next screen, SETUP is terminated with the modified information saved in CMOS.
Then the server automatically reboots the system.
Advertisement
Table of Contents
