NEC Express5800/140Rf-4 User Manual page 111

Memory Configuration
Selecting "Memory Configuration" on the Advanced menu shows the following screen.
See the table below for the items.
Option Parameter
Installed –
memory
Available –
under 4GB
Memory [No]
Retest Yes
Extended 1MB
RAM Step 1KB
Every Location
[Disabled]
Online Spare [Disabled]
Memory Enabled
Memory RAS [Normal]
Feature Mirror
Description
Indicates the capacity of mounted memory.
(Display only)
Indicates the capacity of memory available in
the area smaller than 4GB. (Display only)
Clears the DIMM group error status
information. Run this menu when the failed
DIMM(s) are replaced.
"1MB" indicates that the memory test is done in
the unit of 1MB. "1KB" indicates that the
memory test is done in the unit of 1KB.
"Every-Location" indicates that every memory
device is tested. "Disabled" indicates that only
memory initialization is done.
Selectable when the Online Spare Memory can
be configured with the installed DIMMs.
Select "Enabled" to enable the Online Spare
Memory feature.
Selectable when the Memory Mirroring can be
configured with the installed DIMMs.
Set the memory configuration. Select "Mirror"
to enable the memory mirroring function.
Configuring Your Server 4-13
Your Setting
[ ]: Factory-set