Table of Contents
Advertisement
4-50 Configuring Your Server
Using WebBIOS
Starting WebBIOS
1.
Press Esc when the screen as shown below appears after powered on the server.
2.
Press Ctrl + H on POST screen to start WebBIOS.
POST screen image (with no virtual disk assigned)
LSI MegaRAID SAS-MFI BIOS Version XXXX (Build MMM DD, YYYY)
Copyright (c) 2007 LSI Corporation
HA -X (Bus X Dev X) MegaRAID SAS PCI Express(TM) ROMB
FW package: X.X.X-XXXX
0 Logical Drive(s) found on the host adapter.
0 Logical Drive(s) handled by BIOS
Press <Ctrl> <H> for WebBIOS
IMPORTANT:
POST.
Do not press unnecessary key such as Pause during
Advertisement
Table of Contents
