NEC Express5800/140Rf-4 User Manual page 319

Cannot turn the power OFF at the blue screen:
→ If you want to turn off the power at the blue screen, execute forced power off
(forced shut down: continue to press POWER/SLEEP switch for 4 seconds). The
power will not be turned off if you press the switch just one time.
The processor name displayed in [General] tab of [System Property] is not in correct position.
→ There is no problem for operation.
The system displays the message below and fails to log in.
→ In Windows Server 2003, the following message will be displayed if you use the
operating system without executing the license authentication. Select "Yes", and
execute the procedure for license authentication.
This copy of Windows must be activated with Microsoft before you can
About System Log when re-starting the system on Windows Server 2003
Type:
Source:
Event ID:
Description: Adapter Intel(R) PRO/100 Network Connection: Adapter Link Down
→ When re-starting the system without connecting the network cable, this log may
be found in system event log.
But this has no effect on the behavior of LAN driver.
Confirm that the system is connected with the LAN cable properly.
If 100Base LAN port is not utilized, disable 100Base LAN on device manager or
disable it on BIOS configuration. Then, the log will not be registered.
Windows Product Activation
continue, You cannot log on until you activate Windows.
Do you want to activate Windows now?
To shut down the computer, click Cancel.
YES
Warning
E100B
4
NO Cancel
Troubleshooting 8-55