Should Add Toner Indicator Light Up - Bell and Howell ABR2300/AR23 Operator's Manual

SHOULD ADD TONER INDICATOR LIGHT UP

When the Add Toner Indicator
one. Please note: Only use Product Code 8910-449 P-P Toner.
NOTE
If prints are made after the Add Toner Indicator has lit up, the image density of the print will become
too light. Replace the Toner cartridge immediately.
When the Add Toner Indicator lights up, some amount of toner may be resident in the Toner
Cartridge. Before attempting to slide out the Toner Cartridge, empty it by tapping the Cartridge
Knob, or rotate the Knob counter-clockwise 180° several times.
on the Control Panel lights up, replace the Toner cartridge with a new
Place the Power ON/OFF Switch in the OFF
position and open the Side Cover-Rt.
Tap the Cartridge Knob lightly 5 to 6 times.
Take hold of the Cartridge Knob, rotate it counter-
clockwise 180°, and gently slide the Cartridge out.
29