Advertisement
Quick Links
DO
GUIDE
DSP-860/DSP-1280/DSP-1281/DSP-1282/DSP-1283
Crestron Avia
Digital Signal Processors
TM
The Crestron Avia™ DSP-860, DSP-1280, DSP-1281, DSP-1282, and DSP-1283 series of digital signal processors are functionally similar with varying
capabilities. For simplicity within this guide, the term "DSP" is used except where noted.
DO
Install the Device
These devices occupy 1U of rack space. Use a #1 Phillips screwdriver to attach the two included rack ears to the device, and then mount the device into the
rack using four mounting screws (not included).
DO
Connect the Device
Make the necessary connections as called out in the following diagrams. Connect power last.
Rear Panel
MIC/LINE INPUTS:
LINE OUTPUTS:
From microphone or
To audio ampli ers or
other audio sources
other mixer inputs
DSP-860
MIC/LINE INPUTS:
LINE OUTPUTS:
From microphone or
To audio ampli ers or
other audio sources
other mixer inputs
DSP-1280
MIC/LINE INPUTS:
LINE OUTPUTS:
DANTE PRI:
From microphone or
To audio ampli ers or
To primary
other audio sources
other mixer inputs
DANTE™ network
DSP-1281
LAN:
POWER:
10/100/1000BASE-T
From
Ethernet to LAN
ac power outlet
Ground
LAN:
POWER:
10/100/1000BASE-T
From
Ethernet to LAN
ac power outlet
Ground
LAN:
POWER:
10/100/1000BASE-T
From
Ethernet to LAN
ac power outlet
DANTE SEC:
Ground
To secondary DANTE network
DO
Check the Box
QUANTITY
2
Bracket, Rack Ear, 1U
1
Cable, USB 2.0, A - B, 6' (1.83 m)
1
Power Cord, 6' 7" (2 m)
DSP-860 Only
14
Connector, 3-Pin
DSP-1280, DSP-1281, DSP-1282, and DSP-1283 Only
20
Connector, 3-Pin
MIC/LINE INPUTS:
LINE OUTPUTS:
From microphone or
To audio ampli ers or
other audio sources
other mixer inputs
DSP-1282
USB:
To Crestron RL
®
system or third-party
USB host device
MIC/LINE INPUTS:
LINE OUTPUTS:
From microphone or
To audio ampli ers or
other audio sources
other mixer inputs
DSP-1283
USB:
To Crestron RL system or third-
To secondary
party USB host device
DANTE network
NOTE:
Ensure that the computer that is running the Crestron Avia Audio tool and the DSP are on the same subnet.
Observe the following when connecting devices that are equipped with Dante
•
DANTE PRI ports should be connected to a gigabit switch serving the primary Dante network.
•
(Optional) DANTE SEC ports should be connected to a gigabit switch serving the secondary Dante network.
•
The primary Dante network should never mix with the secondary Dante network.
If unbalanced connections are required, refer to the following diagrams.
Signal
Ground
Signal
Shield
Jumper
Unbalanced Input Wiring
Unbalanced Output Wiring
Front Panel
CAUTION:
When connecting a Windows
®
7 or Windows 8 computer to the COMPUTER port for the first time, make sure the computer has a live connection
to the Internet. For more information, refer to Answer ID 5745 in the Online Help section of the Crestron website (support.crestron.com).
NOTE:
The front panel's COMPUTER port can be used to directly connect a computer running the Crestron Avia Audio tool, bypassing the LAN connection.
COMPUTER:
Direct computer connection to device
DSP-1281 and DSP-1283
ITEM
VOIP:
POWER:
To VOIP network
From
ac power outlet
LAN:
PHONE:
Ground
10/100/1000BASE-T
To phone line
Ethernet to LAN
DANTE PRI:
VOIP:
POWER:
To primary
To VOIP network
From
DANTE network
ac power outlet
DANTE SEC:
LAN:
PHONE:
Ground
10/100/1000BASE-T
To phone line
Ethernet to LAN
network capability (DSP-1281 and DSP-1283):
®
PART NUMBER
2032122
2014966
2001134
2003575
2003575
Advertisement
Related Manuals for Crestron DSP-860
Summary of Contents for Crestron DSP-860
- Page 1 Internet. For more information, refer to Answer ID 5745 in the Online Help section of the Crestron website (support.crestron.com). NOTE: The front panel’s COMPUTER port can be used to directly connect a computer running the Crestron Avia Audio tool, bypassing the LAN connection. DSP-1281...
- Page 2 Microsoft Corporation in the United States and/or other countries. UL and the UL logo are either trademarks or registered trademarks of Underwriters Laboratories, Inc. in the United States and/ or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.