Chapter 1
An Overview of the Cisco Unified IP Phone
Configuring Cisco Unified IP Phones in
Cisco Unified CallManager
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Understanding the Requirements for Configuring and Installing Cisco Unified IP Phones
To add phones to the Cisco Unified CallManager database, you can use:
Auto-registration
•
Cisco Unified CallManager Administration
•
Bulk Administration Tool (BAT)
•
BAT and the Tool for Auto-Registered Phones Support (TAPS)
•
For more information about these choices, see the
Cisco Unified CallManager Database" section on page
For general information about configuring phones in Cisco Unified CallManager,
refer to the "Cisco Unified IP Phone" chapter in the Cisco Unified CallManager
System Guide and to the "Configuring Cisco IP Phone chapter" in the
Cisco Unified CallManager Administration Guide.
"Adding Phones to the
2-12.
1-23