Editing The Values Of An Option Setting - Cisco 7906G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
Table 4-2 Network Configuration Menu Options
Option Description
DHCP Server IP address of the Dynamic Host
Configuration Protocol (DHCP)
server from which the phone
obtains its IP address.
BOOTP Server Indicates whether the phone
obtains its configuration from a
Bootstrap Protocol (BootP) server
instead of from a DHCP server.
MAC Address Unique Media Access Control
(MAC) address of the phone.
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Related Topics
Displaying a Configuration Menu, page 4-2
•
Unlocking and Locking Options, page 4-4
•
Editing the Values of an Option Setting, page 4-5
•
Network Configuration Menu, page 4-7
•
Device Configuration Menu, page 4-15
•
The Network Configuration menu provides options for viewing and making a
variety of network settings.
applicable, explains how to change them.
For information about how to access the Network Configuration menu, see the
"Displaying a Configuration Menu" section on page
Before you can change an option on this menu, you must unlock options as
described in the "Unlocking and Locking Options" section on page
Yes, or No softkeys for changing network configuration options appear only if
options are unlocked.
For information about the keys you can use to edit options, see the
Values of an Option Setting" section on page
Table 4-2 describes these options and, where
4-5.
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Network Configuration Menu
4-2.
4-4. The Edit,
"Editing the
4-7