Resetting Or Restoring The Cisco Unified Ip Phone; Performing A Basic Reset - Cisco 7906G Administration Manual

Resetting or Restoring the Cisco Unified IP Phone

Resetting or Restoring the Cisco Unified IP Phone

Performing a Basic Reset

Table 9-3 Basic Reset Methods
Operation
Reset phone
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
9-18
There are two methods for resetting or restoring the Cisco Unified IP Phone:
• Performing a Basic Reset, page 9-18
Performing a Factory Reset, page 9-19
•
Performing a basic reset of a Cisco Unified IP Phone provides a way to recover if
the phone experiences an error and provides a way to reset or restore various
configuration and security settings.
Table 9-3 describes the ways to perform a basic reset. You can reset a phone with
any of these operations any time after the phone has started up. Choose the
operation that is appropriate for your situation.
Performing
From any screen (but not when the
phone is idle), press **#**.
Chapter 9 Troubleshooting and Maintenance
Explanation
Resets any user and network
configuration changes that you have
made but that the phone has not written
to its Flash memory to
previously-saved settings, then restarts
the phone.
OL-11515-01