Understanding the Requirements for Configuring and Installing Cisco Unified IP Phones
Table 1-4
Checklist for Configuring the Cisco Unified IP Phone 7906G and 7911G Series in
Cisco Unified CallManager (continued)
Task
4. Add and configure the directory
number on the phone by completing
these required fields in the Directory
Number Configuration window.
Directory number
–
Partition
–
Multiple Calls and Call
–
Waiting
Call Forwarding and Pickup (if
–
used)
Voice Messaging (if used)
–
5. Customize softkey templates
(optional).
6. Assign speed-dial numbers
(optional).
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
1-26
Chapter 1
Purpose
Adds primary and secondary
directory numbers and
features associated with
directory numbers to the
phone.
Adds, deletes, or changes
order of softkey features that
display on the user's phone
to meet feature usage needs.
Adds speed-dial numbers,
Users can change
Note
speed-dial settings
on their phones by
using
Cisco Unified IP
Phone User Options.
An Overview of the Cisco Unified IP Phone
For More Information
Refer to the Cisco Unified
CallManager Administration
Guide: Adding a Directory
Number chapter, and
Cisco Unified IP Phone
Configuration chapter,
"Creating a Cisco Unity Voice
Mailbox" section.
See the
"Telephony Features
Available for the Phone"
section on page
5-2.
Refer to the Cisco Unified
CallManager Administration
Guide, Softkey Template
Configuration chapter.
See the
"Configuring Softkey
Templates" section on
page
5-13.
Refer to the Cisco Unified
CallManager Administration
Guide,
Cisco Unified IP Phone
Configuration chapter.
OL-11515-01