Cisco 7906G Administration Manual page 147

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature
Caller ID Blocking Allows a user to block their phone number
Cisco Call Back
Conference
Direct transfer
Do Not Disturb
(DND)
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
OL-11515-01
Description
or e-mail address from phones that have
caller identification enabled.
Allows a user to receive call back
notification on a Cisco Unified IP Phone
when a called party's line becomes
available.
Initiates an ad hoc conference and then
conferences in other participants one at a
time.
Joins two established calls (calls that are on
hold or in connected state) into one call and
drops the feature initiator from the call.
Does not initiate a consultation call and
does not put the active call on hold.
Allows a user to block incoming calls on the
phone with a busy tone. Valid values
include:
User Controlled (default): a user can
•
turn DND on and off on the phone.
Admin Controlled: a user can not turn
•
DND on or off on the phone.
Telephony Features Available for the Phone
Configuration Reference
Refer to the
Cisco Unified CallManager
Administration Guide.
Refer to
Cisco Unified CallManager
Features and Services Guide for
configuration instructions.
Refer to
•
Cisco Unified CallManager
Administration Guide.
Refer to
•
Cisco Unified CallManager
System Guide.
For more information, refer to the
Cisco Unified CallManager
System Guide,
Cisco Unified IP Phones chapter.
Refer to the
Cisco Unified CallManager
Administration Guide, SIP Profile
Configuration chapter.
5-5