Cisco 7906G Administration Manual page 172

Status Menu
Table 7-2 Status Messages on the Cisco Unified IP Phone 7906G and 7911G (continued)
Message
Checksum Error
CTL Installed
CTL update failed
DHCP timeout
Dialplan Parsing
Error
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
7-6
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Description
Downloaded software file is
corrupted.
A certificate trust list (CTL)
file is installed in the phone.
The phone could not update its
certificate trust list (CTL) file.
DHCP server did not respond.
The phone could not parse the
dialplan XML file properly.
Possible Explanation and Action
Obtain a new copy of the phone firmware and
place it in the TFTPPath directory. You should
only copy files into this directory when the
TFTP server software is shut down, otherwise
the files may be corrupted.
None. This message is informational only.
For more information about the CTL file,
refer to Cisco Unified CallManager Security
Guide.
Problem with the CTL file on the TFTP
server.
For more information, refer to
Cisco Unified CallManager Security Guide.
Network is busy—The errors should
•
resolve themselves when the network
load reduces.
No network connectivity between the
•
DHCP server and the phone—Verify the
network connections.
DHCP server is down—Check
•
configuration of DHCP server.
Errors persist—Consider assigning a
•
static IP address. See the
Configuration Menu" section on page 4-7
for details on assigning a static IP
address.
Problem with the TFTP downloaded dialplan
XML file.
For more information refer to Cisco Unified
CallManager Administration Guide.
"Network
OL-11515-01