Cisco 7906G Administration Manual page 178

Status Menu
Table 7-2 Status Messages on the Cisco Unified IP Phone 7906G and 7911G (continued)
Message
No CTL installed
No default router
No DNS server IP
Programming Error
Successful – MD5
Cisco Unified IP Phone 7906G and 7911G Administration Guide for Cisco Unified CallManager 5.1
7-12
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Description
A CTL file is not installed in
the phone.
DHCP or static configuration
did not specify a default
router.
A name was specified but
DHCP or static IP
configuration did not specify a
DNS server address.
The phone failed during
programming.
The phone attempted an
802.1X transaction and
authentication achieved.
Possible Explanation and Action
Occurs if security is not configured or, if
security is configured, because the CTL file
does not exist on the TFTP server.
For more information, refer to
Cisco Unified CallManager Security Guide.
If the phone has a static IP address, verify
•
that the default router has been
configured. See the
Configuration Menu" section on page 4-7
section for details.
If you are using DHCP, the DHCP server
•
has not provided a default router. Check
the DHCP server configuration.
If the phone has a static IP address, verify
•
that the DNS server has been configured.
See the "Network Configuration Menu"
section on page 4-7
If you are using DHCP, the DHCP server
•
has not provided a DNS server. Check the
DHCP server configuration.
Attempt to resolve this error by power cycling
the phone. If the problem persists, contact
Cisco technical support for additional
assistance.
The phone achieved 802.1X authentication.
For more information, see the
Authentication and Status" section on
page 4-36.
"Network
section for details.
"802.1X
OL-11515-01