Upgrading The Software - Axis PrintPoint 140 BJC User Manual

Appendix C Updating the Software
Web Browser
Support
Your dealer

Upgrading the Software

Note:
Updating Using the
AXIS NetPilot™
74
Because the AXIS PrintPoint 140 BJC supports the HTTP protocol
over TCP/IP, you may download the latest software releases directly
from the Software Upgrade Page.
To display the Software Upgrade Page, simply click the 'Software
upgrade' link within the Management Page. By following the
instruction provided, you may then automatically initiate a file
transfer between the Axis Public Archive Server and your workstation.
Once the transfer is complete, you should then download the image
file to the AXIS PrintPoint 140 BJC using FTP, as described in
Upgrading over the Network using FTP, on page 75.
Contact your dealer to check if there have been any new releases of the
software. You should have your present version number ready to
compare against the latest software release.
There are three methods with which you can update to the AXIS
PrintPoint 140 BJC Flash memory:
• using the AXIS NetPilot™ over IPX/SPX, or
• over the network using FTP on a TCP/IP network, or
• through the parallel port LPT1,
The preferred methods are described below.
Updating instructions are also supplied with the software update.
This is the most convenient method for updating AXIS Network Print
Server Software. An Installation Wizard is available to guide you
through the necessary procedures, simply click the Upgrade icon of
the AXIS NetPilot™ Toolbar to display the Upgrade Wizard menu.
AXIS PrintPoint 140 BJC User's Manual