Upgrading The Firmware Software - Axis 5400 User Manual

Section 11: Upgrading the Software
134

Upgrading the Firmware Software

Upgrading using
AXIS ThinWizard
You can upgrade the AXIS 5400 Flash memory using one of the
following methods:
• AXIS ThinWizard (TCP/IP)
• FTP (TCP/IP)
• AXIS NetPilot Upgrade Wizard (IPX/SPX)
Updating instructions are also supplied with the software update.
Note:
AXIS ThinWizard is a tool that enables batch upgrading of several
print servers and should be used for upgrading the flash memory in
TCP/IP networks.
You must assign the AXIS 5400 with an IP address, as described in
Assigning an IP address, on page 25, before you can use this upgrading
method.
Follow the instructions below to upgrade your print servers using
AXIS ThinWizard:
1. Click the Manage Network button in the AXIS ThinWizard
main menu.
2. Select a network group from the drop-down list. You can only
update the servers that are included in the selected network group.
3. All AXIS servers included in the network group appear. Click the
Firmware button to start the Upgrade Wizard.
4. Follow the instructions that are presented to you to complete the
installation.
Refer to Using AXIS ThinWizard, on page 103, for more information
about AXIS ThinWizard.
AXIS 5400 User's Manual