Installing A Hard Disk Drive In Position 2 (Front Position) - HP B132L+ Owner's Manual

Changing Your Workstation's Hardware Configuration
Installing Storage Devices
3 Align the four feet on the bottom of the disk drive carrier with the square holes in
Figure 35
4 Set the drive in the storage tray.
5 Connect the power connector and the appropriate SCSI connector to the drive.
6 Push the drive toward the rear of the tray until the locking tab on the drive carrier
128
the storage tray, as shown in Figure 35.

Installing a Hard Disk Drive in Position 2 (Front Position)

snaps into place, as shown in Figure 35.