Installing The Storage Tray Assembly - HP B132L+ Owner's Manual

8 Align the pins on the back panel of the main tray with the holes on the rear of the
Figure 61
9 Lower the front of the storage tray and move it slightly forward or backward to
10 Slide the storage tray towards the rear of the main tray until the pins are fully seat-
11 Replace and tighten the storage tray retaining screw, as shown in Figure 61.
storage tray and slide the storage tray onto the pins, as shown in Figure 61.

Installing the Storage Tray Assembly

align the pins on its sides with the slots on the main tray, as shown in Figure 61.
ed in the main tray slots, as shown in Figure 61.
Changing Your Workstation's Hardware Configuration
Replacing the Battery
159