Security Loop; Audio Connectors - HP B132L+ Owner's Manual

Security Loop

The security loop provides a means of locking the storage tray, with a pad-
lock or other locking device, to prevent unauthorized removal from the sys-
tem.

Audio Connectors

Your workstation has audio input and output capability through external
input and output connectors on the rear panel and through an internal
speaker. The rear panel contains the Audio IN (stereo line-in) and Audio
OUT (stereo line-out) connectors.
NOTICE: To maintain compliance with FCC/CISPR B you must use fully shielded,
unbalanced audio cables and plugs.
The audio connectors are standard stereo audio mini-jacks. Hewlett-Packard
recommends using gold-plated plugs available through audio retailers for
best quality recording and playback through the external connectors. The
following is a summary of the workstation audio features:
•
•
Audio Features
Programmable sample rates:
Programmable output attenuation:
Programmable input gain:
Input monitoring:
Audio Input
Line In
Mono microphone (on the front panel) compatible with
System Unit Rear Panel Connectors
8kHz, 16kHz, 32kHz, 48kHz, 11.025kHz,
22.05kHz, and 44.1kHz.
0 to -96dB in -1.5dB steps
0 to 22.5dB in 1.5dB steps
16-bit linear, 8-bit u-law, or A-law coding
1.5V phantom supply (bias voltage supplied by the
System Overview
15