Installing A Hard Disk Drive In A Front-Access Shelf - HP Kayak XW A2-U2-W2 User Manual

Installing a Hard Disk Drive in a Front-Access Shelf

1 Disconnect the computer's power cord and any telecommunications
2 Remove the computer's cover (see page 23).
3 Remove the fan connection to the system board (see the illustration
4 Press the retaining buttons on each side of the HP UltraFlow airflow
5 Slide out the power supply to provide better access to the disk drive
6 Unscrew and remove an unused drive tray.
7 Mount the drive on the tray as shown below.
Set the drive on
the tray
cable.
on page 27).
guide and lift it out of the PC Workstation's case.
cables (see page 27).
2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
Remove the
drive tray
Fix the drive to
the tray
English 39