Single-Ended Scsi Device Ids - HP B132L+ Owner's Manual

SCSI Connections
Assigning SCSI Device IDs
Table 25

Single-Ended SCSI Device IDs

SCSI Device Drives
System SCSI Drive(s)
CD-ROM Drive (if present, uses ID
No.2)
4-mm DDS Tape Drive
(if present, uses ID No.1)
1st __________________________
2nd __________________________
3rd __________________________
4th ___________________________
5th ___________________________
6th __________________________
7th __________________________
NOTICE: You can have no more than 7 single-ended SCSI devices (internal and external) con-
nected to the system.
5 Write in the SCSI device ID of any internal drives in Table 25.
6 Write in the type of external single-ended drives currently connected to your
7 Add your new drive to the table if it is an external device. If it is an internal drive,
186
Internal Device ID
(Address) Number
(Only 0 through 6
Internal System Drives:
____________________
____________________
____________________
External Device Drives
workstation under the heading "External Device Drives" and each drive's SCSI
device ID under the heading "Device ID."
continue to Step 8.
Available)
____________________
N/A ____________________
N/A ____________________
____________________
N/A
N/A ____________________
N/A ____________________
N/A ____________________
____________________
N/A
N/A ____________________
External Device ID
(Address) Number
(Only 0 through 6
Available)
N/A
N/A