Installing A Hard Disk Drive In A Front-Access Shelf - HP Kayak XA05 Supplementary Manual

Set the drive on
the tray
2 How to Install Accessories In Your Minitower PC Workstation
Installing Mass Storage Devices

Installing a Hard Disk Drive in a Front-Access Shelf

1 Disconnect the computer's power cord and any LAN or
telecommunications cable.
2 Remove the computer's cover (see page 27).
3 Remove the fan connection to the system board (see the illustration
on page 31).
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
5 Slide out the power supply to provide better access to the disk drive
cables (see page 31).
6 Unscrew and remove an unused drive tray.
7 Mount the drive on the tray as shown below.
40 English
Remove the
drive tray
Fix the drive to
the tray