Replacing The Storage Tray Cover - HP B132L+ Owner's Manual

10
11
Figure 68

Replacing the Storage Tray Cover

12 If you are not connecting any external devices to the external FWD SCSI connec-
13 Follow the instructions in Replacing the Main Tray Assembly on page 112
Installing the Optional Fast Wide Differential SCSI Controller
Slide the cutouts on the rear of the storage tray cover onto the pins on the
storage tray swing the cover into place, as shown in Figure 68.
and
Press down on the front edge of the cover to make sure that the locking
tabs on the storage tray fully engage the cover.
tor you must connect the FWD SCSI terminator.
Changing Your Workstation's Hardware Configuration
167