Preparing Your Workstation - HP B132L+ Owner's Manual

Preparing Your Workstation

This section describes how to prepare your workstation for changing its con-
figuration. Use the following procedure to prepare your workstation:
1 Shut down your workstation by typing the shutdown -h command as root user.
NOTE: When you press the power button, the workstation automatically shuts down the
operating system before it powers off the system. However, this is not the
recommended method for shutting down your system.
2 When the workstation has completed shutting down, turn off the system unit, turn
3 Unplug the power cord of the system unit, the monitor, and any peripheral devic-
4 Unplug the power cord from the back of the system unit.
5 Remove the floor stand from the system unit (if used), as shown in Figure 20.
off the monitor, and any peripheral devices connected to the workstation.
es from ac wall outlets.
Changing Your Workstation's Hardware Configuration
Preparing Your Workstation
109