B Changing Your Workstation's Hardware Configuration - HP B132L+ Owner's Manual

Changing Your Workstation's Hardware Configuration
This appendix describes the procedures to change your workstation's hard-
ware configuration. It presents the information in the following sections:
•
•
•
•
•
•
•
•
•
•
CAUTION: Always wear a properly grounded wrist strap when reconfiguring your
workstation.
Use the following tools to remove or replace hardware parts when changing
your configuration:
•
•
•
Also, read the ESD Precautions in Appendix A of this guide.
106
Checking the SCSI IDs
Preparing your workstation
Removing the main tray assembly
Replacing the main tray assembly
Installing storage devices
Installing additional memory
Installing cache boards
Installing an EISA, GSC, or PCI option board
Installing an optional System Graphics RAM (EGRAM) board
Changing your monitor type
Light-duty flat blade screwdriver with 150 mm (6 in.) blade
Needlenose pliers
Torx screwdriver