Disconnecting The Storage Tray Assembly - HP B132L+ Owner's Manual

Changing Your Workstation's Hardware Configuration
Replacing the Battery
3 Disconnect the cables from the system board and the optional fast, wide SCSI
4 Remove the storage tray retaining screw, as shown in Figure 58.
Storage Tray
Power
Figure 58

Disconnecting the Storage Tray Assembly

156
adapter, as shown in Figure 58.
When disconnecting the floppy cable use the following procedure:
a Lift the locking ring on the connector to the up, or unlocked position.
b While holding the locking ring in the unlocked position, pull the cable out of
the connector.
FWSCSI
SESCSI
CD Audio
Floppy Connector