Advance; Dhcp Server - ATCOM AT530P User Manual

AT530P User Manual
Enable Register: enable or disable register
IAX(Default Protocol): Set IAX 2 as the default protocol , if not the system will choose SIP as
default
Enable G.729: Using G.729 speech coding mandatory consultations
2.5

Advance

2.5.1 DHCP Server

DHCP server manage page.
User may trace and modify DHCP server information in this page.
DNS Relay: enable DNS relay function.
User may use below setting to add a new lease table.
Lease Table Name: Lease table name.
Lease Time:
Start IP: Start IP of lease table.
End IP: End IP of lease table. Network device connecting to the AT530P LAN port can
dynamic obtain the IP in the range between start IP and end IP.
Netmask: Netmask of lease table.
Gateway: Default gateway of lease table
DNS: default DNS server of lease table.
Notice: This setting won't take effect unless you save the config and reboot the
device
DHCP server lease time.
12/49