Tree Structure - ATCOM AT530P User Manual

AT530P User Manual

5 Tree Structure

5.1.1 account
path: <account>#
[stop]start Syslog
Configure Syslog server address and port
Example: #<config-account-syslog>#server –ip 202.112.20.10
Show syslog settings
Show all account settings
5.1.2 config
accesslist firewall config
path: <config-accesslist>#
add firewall rule
–srcmask x.x.x.x–desaddr x.x.x.x –desmask x.x.x.x –portrange xxx –portnum xxx
Example:<config-accesslist>#entry –I/O input –P/D deny –proto udp –straddr 202.112.10.1
–srcmask 255.255.255.0 –desaddr 210.25.132.1 –desmask 255.255.255.0 –portrange neq
–portnum 5060
delete firewall rule
Example :<config-accesslist>#no entry –I/O input –index 1
Show firewall settings
[disable] enable input filter
[disable] enable output filter
DHCP
path: <config-dhcp>#
add DHCP rule
–netmask x.x.x.x –gateway x.x.x.x –dnsserver x.x.x.x _time xxx
Example:<config-dhcp>#entry –name lan2004 –startip 192.168.1.2 –endip 192.168.1.254
–netmask 255.255.255.0 –gateway 192.168.1.1 –dnsserver 192.168.10.18
delete DHCP rule
Example: <config-dhcp>#no entry –name lan2004
Show DHCP settings
[disable]enable DNS-relay
dialrule
path: <config-dialrule>#
[disable] enable End with #
Set end with fix length
Disable end with fix length
Set timeout to send
Disable timeout to send
Add digital map
Example: <config-dialrule>#entry –prefix 010 –length 11
Delete digital map rule
Example: <config-dialrule>#no entry –prefix 010
Show current digital map
LAN interface settings
path: <config-interface-fastethernet-lan>#
[disable]enable bridge mode
[disable]enable DHCP service
[disable]enable NAT
---syslog [no] start
---syslog server –ip x.x.x.x _port xxx
---syslog show
---show
---entry –I/O xxx –P/D xxx –proto xxx –srcaddr x.x.x.x
---no entry –I/O xxx –index xxx
---show
---[no]in-access
---[no]out-access
---entry –name xxx –startip x.x.x.x –endip x.x.x.x
---no entry –name xxx
---show
---[no]dns-relay
---[no]endchar
---fixlen xxx
---no fixlen
---timeout-send xxx
---no timeout-send
---entry –prefix xxx –length xxx
---no entry –prefix xxx
---show
---[no]bridgemode
---[no]dhcp-server
---[no]nat
34/49