Advance - ATCOM AT800 series User Manual

AT800 AT800 AT800 AT800 Series
Warning: start/end IP address and PC port IP address MUST be in the same subnet.

Advance

Advance Advance Advance
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Series Series User Series User User User Manual Manual Manual Manual
d) Start IP address—start lease IP address for DHCP service
e) End IP address—end lease IP address for DHCP service
1. 1. 1. 1. Web Web Server Web Web Server Server Server
Enable Web Server:
a) Enable Enable Enable Web Web Server: Web Server: Server: yes/no
submit, if disable web server, the web interface will not be available anymore.
If web server is disabled on AT800/AT800P, it needs restore to factory settings by long
press * and # key when powering on. Please refer to
settings.
Admin Admin password password
b) Admin Admin password password: set admin password here
Tips: input http://ip-address/index
c) U U U U ser ser ser ser password password: set user password here password password
Tips: input http://ip-address
HTTP Port
d) HTTP HTTP Port HTTP Port—the web server port, default is 80. If user has changed the http port, e.g. Port
8080; to log in web interface by URI:
2. 2. 2. 2. VLAN VLAN VLAN VLAN
a) Use Use Use VLAN Use VLAN tagging: VLAN VLAN tagging: tagging: tagging: yes/no
b) Voice Voice Voice Voice VLAN VLAN VLAN Identifier VLAN Identifier—set voice VLAN identifier, range from 1 to 4096 Identifier Identifier
Voice Voice VLAN VLAN Priority Priority
c) Voice Voice VLAN VLAN Priority Priority—set voice VLAN priority, range from 0 to 7
Data Data VLAN VLAN Identifier Identifier
d) Data Data VLAN VLAN Identifier Identifier—set data VLAN identifier, range from 1 to 4096
e) Data Data Data VLAN Data VLAN VLAN VLAN priority priority priority priority—set data VLAN priority, range from 0 to 7
TIPS: The RTP/RTCP packet is voice packet, the others is data packet.
Notes: VLAN can only works in bridge mode. If you enable VLAN in router mode, it
will not work with VLAN.
3. 3. 3. 3. Port Link Port Port Port Link Link Link
manuals search engine
yes/no
yes/no, enable/disable web server; system will reboot after yes/no
in the browser to enter admin web interface.
in the browser to enter user web interface.
http://ip-address:port
yes/no yes/no, enable/disable VLAN tagging, default to no. yes/no
www.atcom.cn
How to restore to factory
in the browser.