Digital Map - ATCOM AT530P User Manual

AT530P User Manual
Enable Strict Proxy: compatible with special server ( when the message is returned , they use
original address but not the address in via field
Enable Quote Name: To work with the server , config here to use quotation mark to include the
displayname
Enable Subscibe: subscribe the message such as other side's status or the voice mail after
successful registration

2.5.7 Digital Map

Digit map is a set of rules to determine when the user has finished dialing.
AT530P support below digital map:
Digital Map is based on some rules to judge when user end their dialing and send the number
to the server. AT530P support following digital map:
----End With "#": Use # as the end of dialing.
----Fixed Length: When the length of the dialing match, the call will be sent.
----Timeout: Specify the timeout of the last dial digit. The call will be sent after timeout
----Prefix: User define digital map:
[ ] represents the range of digit, can be a range such as [1-4], or use comma such as [1,3,5], or
use a list such as [234]
x represents any one digit between 0~9
Tn represents the last digit timeout. n represents the time from 0~9 second, it is necessary. Tn
must be the last two digit in the entry. If Tn is not included in the entry, we use T0 as default, it means
system will sent the number immediately if the number matches the entry.
Example:
[1-8]xxx
9xxxxxxx
911
All number from 1000 to 89999 will be sent immediately.
8 digits numbers begin with 9 will be sent immediately.
Number 911 will be sent will be immediately
18/49