Network; Basic; Advance - ATCOM AT840 User Manual

AT840 Series User Manual

2) Network

Basic

1.1.
There are 3 ways to connect to the internet DHCP, Static and PPPoE, please choose one
according to your own situation.
Network mode: you can choose DHCP, Static and PPPoE
DHCP: AT840 default to use DHCP to obtain dynamic IP.
Static: If you want to set your ip as static, you should fill ip, netmask, gateway and DNS
information.
PPPoE: If connect AT840 to modem, you should fill ADSL account and the password which
assigned by your network service provider.

Advance

1.2.
Web Server

Enable Web Server: enable or disable web access. If choose "no", you can not access AT840

ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn 25