ATCOM AT530P User Manual page 36

AT530P User Manual
Show route info
Show netservice info
Dial-peer settings
path: <config-pbook>#
[disable]enable calling through GK and proxy
Add number-IP bond entry
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip
Add number-IP bond and add prefix to the dial number
---entry –number xxx –ip x.x.x.x –protocol xxx _add xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _add 123(dial
100 and will send 123100 according this rule)
Add number-IP bond and replace the destination with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _all xxx
Example:<config-pbook>#entry –number 100 –ip 202.112.20.100 –protocol sip _all 123( user
dial 100 and gateway will sent 100 instead)
Add number-IP bond and delete the prefix of the destination number
---entry –number xxx –ip x.x.x.x –protocol xxx _del xxx
Example:<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _del 2 (dial
1234 will send 34 instead)
Add number-IP bond and replace the prefix with another number
---entry –number xxx –ip x.x.x.x –protocol xxx _rep xxx _length xxx
Example:<config-pbook>#entry –number 1234 –ip 202.112.20.100 –protocol sip _rep 567
_length 2(dial 1234 will send 56734)
Delete dial-peer entry
Show current dial-peer rules
Set default voip protocol
Port settings
<config-port># 或<config-port X>#
path:
set accecp relay mode
set callerid mode
disable callerid
config call forward
xxx
Example:<config-port 0>#callforward –condition busy –number 100 –ip 202.112.10.100 -port
5060 –protocol sip
Disable call forward
[disable]enable call transfer
[disable]enable call waiting
Set prefer codec
Set DTMF gain
Set black list
Show black list
Set input volume
Set outgoing limit list
Show outgoing limit list
Set output volume
[disable]enable outgoing limit
[disable]enable black list
[disable]enable outgoing limit and black list ---[no]shutdown
[disable]enable 3-way conference
Show port settings
---route
---show
---entry –number xxx –ip x.x.x.x –protocol xxx
---no entry –number xxx
---show
---default-protocol xxx
---accept-relay xxx
---callerid xxx
---no callerid
---callforward –conditon xxx –number xxx –ip xxx –port xxx –protocol
---no callforward
---[no]calltransfer
---[no]callwaiting
---codec xxx
---dtmfvolume xxx
---in-limit xxx
---in-limit
---input xxx
---out-limit xxx
---out-limit
---output xxx
---[no]shutdown out
---[no]shutdown in
---[no]threetalk
---show
---[no]enableGKandProxy
36/49