Restore To Factory Default - ATCOM AT530P User Manual

AT530P User Manual
Command Function
ping Check if the destination is accessible
tracert Show network path info
show basic Show network settings
show ip route Show route table
show ip arp Show arp table
show ip netstat Netstat programe
telnet Telnet to another device

7 Restore to factory default

#setdefault clear IP phone settings expect network part
#setdefault all clear all settings.
Example
#ping www.google.com
#tracert www.google.com
#show basic
#show ip route
#show ip arp
#show ip netstat
#telnet 192.168.1.2
41/49