Voip Sip Config - ATCOM AT530P User Manual

AT530P User Manual
VoIP
2.4
SIP Config
2.4.1 SIP config
Setting page of public SIP server:
Register Server Addr:
Register Server Port:
Register Username:
number)
Register Password:
Proxy Server Addr:
IP for register server and proxy server, in this case you don't need to configure the proxy
server information. )
Proxy Server Port:
Proxy Username:
Proxy Password:
Domain Realm:
use the proxy server address as sip domain.
Local SIP port:
Phone Number:
Display name:
letter and number input is allowed here
Register Expire Time:
configure this expire time to the server recommended setting if it is different from the SIP
server.
Detect Interval Time: Co-work with the Auto Detect Server, if Auto Detect Server is enable,
AT530P will periodically detect if the SIP server is available according this setting.
User Agent:
Encrypt Key: The particular service system decrypts of the key , matching with the server
Type usage, the key provide by the particular service system supplier, default is empty
Register address of public SIP server
Register port of public SIP server，default port is 5060
Username of your SIP account (Always the same as the phone
Password of your SIP account.
IP address of proxy SIP server (SIP provider always use the same
Signal port of SIP proxy
proxy server username
proxy server password
SIP domain, enter the sip domain if any, otherwise AT530P will
Local SIP register port, default 5060
Phone number of your SIP account
config the diaply name , it can be displayed at the callee's side . only
register expire time, default is 600 seconds. AT530P will auto
10/49