ATCOM AT530P User Manual page 37

AT530P User Manual
PPPoE settings
path: <config-pppoe>#
PPPoE account settings
Example:<config-pppoe>#auth –user aaa –password 123456
[disable]enable service settings
Show pppoe settings
QOS settings
path: <config-qos>#
[delete]add QoS table entry --- [no]entry –addr x.x.x.x –mask x.x.x.x
Example:<config-qos>#entry –addr 202.112.10.1 –mask 255.255.255.0
[disable]enable include QOS table
Show QoS settings
SIP settings
path: <config-sip>#
[disable]enable registration
[disable]enable auto detect server
Set sip domain
Set DTMF mode
Set auto detect interval time
Set RFC edition
[disable]enable auto swap server
Set sip account
Set local SIP signal port
Set proxy server
_password xxx
Example:<config-sip-server># proxy ip 210.25.23.22 _port 5060 _user aaa _password
123456
Set register server info
_password xxx
Set alter proxy info
_password xxx
Set alter server info
_password xxx
[disable]enable stun server
Set stun detecting interval time
Set stun server ip and port
Show current sip info
User management
path: <config-user>#
Change user right.
Example:<config-user>#access –user aaa –access 7
Change user password
Add new user
Example:<config-user>#entry –user abc –access 7
Delete user entry
Show current sip info
---auth –user xxx -password xxx
---[no]service xxx
---show
---show
---[no] register
---[no] detect-server
---default-domain xxx
---dtmf-mode xxx
---interval-time xxx
---rfc-version xxx
--- [no]swap-server
---number-password –number xxx –password xxx
--- signalport xxx
---server proxy -ip x.x.x.x _port xxx _user xxx
---server register -ip x.x.x.x _port xxx –user xxx
---alter-server proxy –ip x.x.x.x _port xxx _user xxx
---alter-server register –ip x.x.x.x _port xxx _user xxx
---stun [no]enable
---stun interval-time xxx
---stun –ip x.x.x.x –port xxx
---show
---access –user xxx –access xxx
---no entry –user xxx
---[no]include
---password –user xxx
---entry –user xxx –access xxx
---show
37/49