Page 2
AT-640P Quick Quick Quick Quick Start Start Start Start Guide Guide Guide Guide 1、Installation and access......................... 3 2、Configure AT-640P to make VoIP calls..................4 A、WAN Config..........................4 B、SIP Config..........................5 C、IAX2 config..........................6 ATCOM TECHNOLOGY CO., LIMITED Downloaded from www.Manualslib.com manuals search engine...
Page 3
Installation: Set up AT-640P as below: If AT-640P is connect to your network. Press Navigation button up or down to get the WAN IP address. Modify your computer’s IP address to the same network as AT-640P Key in AT-640P’s IP address in the web browser and press enter, then you can access AT-640P’s web manage interface.
Page 4
----Key in the DNS information in the “Primary DNS” and “Alter DNS” fields. DHCP: DHCP: Use DHCP: DHCP: ----Select DHCP If you have a DHCP server in your network, AT-640P will automatically obtain the network information from your DHCP server. Use PPPoE: PPPoE: PPPoE: PPPoE:...
Page 5
Then you can make VoIP calls if the WAN and SIP config is correct. Notice: Notice: Notice: Notice: Please go to the “Config Manage” and save the config, otherwise you will lose the setting after device reboot. ATCOM TECHNOLOGY CO., LIMITED Downloaded from www.Manualslib.com manuals search engine...
Page 6
Echo test text: echo test number in text format � Refresh time: IAX refresh time � Enable Register: enable or disable register � Enable G.729: Using G.729 speech coding mandatory consultations ATCOM TECHNOLOGY CO., LIMITED Downloaded from www.Manualslib.com manuals search engine...
Need help?
Do you have a question about the AT-640P and is the answer not in the manual?
Questions and answers