Table of Contents
Advertisement
User Manual 3155
Open Waveform...
The Open Waveform... function lets you browse your disk for previ-
ously saved waveform files and loads these waveforms onto the
waveform graph. This function allows you to import FM waveforms in
ASCII file format (space delimited test with an *.ASF extension).
Save Waveform
The Save Waveform function stores the active waveform in your
3155 directory as a binary file with the *.wvf extension. If saving for
the first time, the Save Waveform As... command is invoked auto-
matically, letting you select the name, location and format of your
waveform file.
Save Waveform As...
Use the Save Waveform As... function the first time you save your
waveform. It lets you select the name, location and format of your
waveform file. The Save As... dialog box is shown in Figure 3-18.
Figure 3-48, The FM Composer Save AS... Dialog Box
Exit
The Exit function ends the current FM Wave Composer session and
takes you to the Panels screen. If you made changes to your wave-
form since it was last saved, save your work before using this com-
mand.
ArbConnection 3-43
Advertisement
Table of Contents
