Racal Instruments 3155 User Manual page 152

PULSe:WIDTh?
Response and default
The 3155 returns the present width value. Default value is 10.
PULSe:TRANsition<rise>
Purpose
This command programs pulse transition from low to high of the standard pulse waveform. This command
has no affect on arbitrary waveforms.
•
<rise> sets the rise time parameter
Parameter type
Numeric
Parameter range
<rise> 0 to 99.9 in units of percent
PULSe:TRANsition?
Response and default
The 3155 returns the present rise time value. Default value is 10.
PULSe:TRANsition:TRAiling<fall>
Purpose
This command programs pulse transition from high to low of the standard pulse waveform. This command
has no affect on arbitrary waveforms.
•
<fall> sets the fall time parameter
Parameter type
Numeric
Parameter range
<fall> 0 to 99.9 in units of percent
PULSe:TRANsition:TRAiling?
Response and default
The 3155 returns the present fall time value. Default value is 10.
RAMP:DELay<delay>
Purpose
This command programs delay of the standard ramp waveform. This command has no affect on arbitrary
waveforms.
•
<delay> sets the delay parameter
Parameter type
Numeric
Parameter range
<delay> 0 to 99.9 in units of percent
Programming Reference 4-42
User Manual 3155