Table of Contents
Advertisement
2-10 Installation
The next step is necessary to verify that the device driver was i n -
stalled properly and is displayed correctly in the System Device
Manger. Do the following:
1. Click on the Start button, then Settings and then Control Panel.
2. In the Control Panel dialog box, find the icon labeled System.
3. Click on the System icon and then on the Device Manager tab.
Click on Racal Instruments. If you installed the driver properly,
4.
your device manager should show the Arbitrary Waveform Gen-
erator Model 3155 as shown in the figure 2-8 below.
Figure 2-8. Checking Driver Installation
User Manual 3155
Advertisement
Table of Contents
