System Commands; Filter - Racal Instruments 3155 User Manual

User Manual 3155
Figure 3-39, The Utility Panel

Filter

The Filter group lets you place filters in series with the output path.
Click on 25 MHz, 50 MHz or All to select both. Click on Off to disable
all filters.
System Commands This sub-group lets you Reset the entire instrument to factory d e-
faults. You can also Clear Error Queue if you made programming
errors and want to remove the error list from the queue. You can also
use the Manual Trigger button to trigger the 3155 if there is no sig-
nal connected to the TRIG IN connector. Other buttons allow you to
Reset Segment Table and Reset Sequence Table.
3-26 ArbConnection