Table of Contents
Advertisement
The ArbDetector
2-22 Installation
The ArbDetector detects all 3155 arbitrary waveform generators that
are plugged into the PXI chassis and lets you review instrument
identity, serial number, installed options etc. You may also use the
device detector to fine-tune your controller type, chassis size and slot
location.
Before you can start using the 3155, you must make sure that the
ArbDetector has been invoked. Look at your lower right corner of
your screen and identify the Startup bar. The ArbDetector icon looks
as shown in Figure 2-24.
Figure 2-24. The ArbDetector Icon at the Startup Tray
The ArbDetector is automatically invoked from the startup menu after
you power on your computer. If, for any reason you cannot find the
ArbDetector icon, you'll have to invoke it manually. From the Start
button select Programs, then Startup and finally the ArbDetector
command. The detector will be invoked and the icon placed in the
startup tray.
When you click on the ArbDetector icon with your right mouse button,
some options will show that will allow you to open the ArbDetector
program, reset all instruments to factory defaults, delete all assigned
slot locations and verify users in case you want to exit the program.
The ArbDetector icon options are shown in Figure 2-25.
Figure 2-25. ArbDetector Icon Options
User Manual 3155
Advertisement
Table of Contents
