Table of Contents
Advertisement
User Manual 3155
TRIangle:PHASe?
Response and default
The 3155 returns the present start phase value. Default value is 0.
SQUare:DCYCle<duty_cycle>
Purpose
This command programs duty cycle of the standard square waveform. This command has no affect on arbi-
trary waveforms.
•
<duty_cycle> sets the duty cycle value
Parameter type
Numeric
Parameter range
<duty_cycle>
1 to 99 in units of percent
SQUare:DCYCle?
Response and default
The 3155 returns the present duty cycle value. Default value is 50.
PULSe:DELay<delay>
Purpose
This command programs delay of the standard pulse waveform. This command has no affect on arbitrary
waveforms.
•
<delay> sets the delay parameter
Parameter type
Numeric
Parameter range
<delay>
0 to 99.9 in units of percent
PULSe:DELay?
Response and default
The 3155 returns the present delay value. Default value is 10.
PULSe:WIDTh<pulse_width>
Purpose
This command programs pulse high portion of the standard pulse waveform. This command has no affect on
arbitrary waveforms.
•
<pulse_width> sets the high time parameter
Parameter type
Numeric
Parameter range
<pulse_width>
0 to 99.9 in units of percent
Programming Reference 4-41
Advertisement
Table of Contents
