Table of Contents
Advertisement
User Manual 3155
sponding toolbar icon.
Trim Left
The Trim Left function operates in conjunction with the left anchor. It
is helpful if you want to "chop off " the left section of your waveform.
After use of this function, the portion to the left of the anchor will be
removed from the graph and the waveform starts where the anchor
was placed before the trim left operation. When using this function,
bear in mind that the number of waveform points must be divisible by
4, or else then the waveform length will automatically adjust to the
nearest legal size.
The Trim Left mode may also be invoked using the cor-
responding toolbar icon.
Trim Right
The Trim Right function operates the same way that the Trim Left
command does except that this command trims the waveform to the
right of the right anchor.
The Trim Right mode may also be invoked using the cor-
responding toolbar icon.
Unmark
The Unmark function resets the anchors on the waveform graph to
points 0 and to the last waveform point.
The Unmark mode may also be invoked using the corre-
sponding toolbar icon.
Undo
The Undo command undoes the last editing operation.
The Undo mode may also be invoked using the corre-
sponding toolbar icon.
NOTE
NOTE
NOTE
NOTE
ArbConnection 3-33
Advertisement
Table of Contents
