Racal Instruments 3155 User Manual page 200

User Manual 3155
Level
Protection
Position
Width
Sine Output
Description
Connector
Impedance
Level
Protection
Source
Frequency Range and Resolution
Flatness
Total Harmonic Distortion
Harmonics and non-related
spurious
INPUTS
TRIG Input
Connector
Impedance
Threshold Level
Min Pulse Width
Slope
10 MHz Reference Input
Connector
Impedance
Threshold Level
Duty Cycle
Specifications A-6
>2 V into 50Ω, 4V nominal into 10KΩ
Protected against temporary short to case ground
Point 0 to n, Programmable with 4-point resolution
Programmable with 4 points resolution
An output that is directly derived from the sample clock
generator and has an output frequency equal to the
programmed sample clock frequency. This output generates
sine waveform that corresponds to sample clock setting,
including modulated waveform, such as FM, sweep and FSK
Front panel SMB
50Ω, ±1%
1 V into 50Ω
Protected against temporary short to case ground
Sample clock frequency
Same as Sample clock
-3dB at 100 MHz
0.3% to 100 KHz
-55dBc to 1 MHz
-45dBc to 10 MHz
-35dBc to 100 MHz
Front panel BNC
10 KΩ, ±5%
TTL
20 ns
Positive or negative going edge.
Front panel SMB
10 KΩ, ±5%
TTL
50%, ±5%